One growing hands-on filament database

3D Printer Filaments I Have Tested: Reliable PLA & PETG Picks

The PLA, PETG and silk filaments that printed well for me - collected on one practical page instead of stretched into separate reviews.

Tested by BenUpdated August 30, 2026Tested Gear3D Printing
Affiliate disclosure: As an Amazon Associate, ThatGermanGuy earns from qualifying purchases. If you buy through a product link, the commission does not add to your price and does not change the findings in this hands-on collection.
Colourful 3D-printer filament spools with an FDM printer in a workshop
The short version

Every filament listed here has worked well in my own printing. I found them easy to print, the finished quality and detail were good, and I did not encounter problematic stringing or moisture-related trouble during my tests. They also offered good value for the results.

This is an evergreen collection rather than a series of near-identical individual reviews. Whenever I test another filament successfully, it can be added to the database below with its material, colour, pack information and current Amazon link.

Results always depend on the printer, slicer profile, storage, ambient humidity and model geometry. My positive experience is a practical reference, not a guarantee that every spool will behave identically in every setup.

9Product families
13Tested links
4Material filters
100%Hands-on listed

My tested filament database

Use the material buttons or search by brand, product or colour. Amazon listings can change their selected colour or bundle, so check the final variation before ordering.

Showing 9 of 9 product families
CrealityPLA

Ender PLA 2-Pack

Colour / variant
Black and Black
Pack
2kg total
Amazon ASIN
B0CHJK57NW
My resultEasy to print, good detail and finish, no problematic stringing or moisture issue in my use, and good value.
OVERTUREPLA

Easy PLA

Colour / variant
Amazon currently shows Easy Orange
Pack
1kg per spool
Amazon ASIN
B0CRB1FCC4
My resultEasy to print, good detail and finish, no problematic stringing or moisture issue in my use, and good value.

Five supplied links currently open the same OVERTURE product family; all are retained here as tested variants.

eSUNPETG

Basic PETG

Colour / variant
Black
Pack
1kg
Amazon ASIN
B0DDTFL214
My resultEasy to print, good detail and finish, no problematic stringing or moisture issue in my use, and good value.
OVERTURESilk PLA

Silk PLA

Colour / variant
Metallic Silk Gold
Pack
1kg
Amazon ASIN
B09634KSYJ
My resultEasy to print, good detail and finish, no problematic stringing or moisture issue in my use, and good value.
eSUNPLA

PLA

Colour / variant
Black
Pack
1kg
Amazon ASIN
B0BWMLQHLB
My resultEasy to print, good detail and finish, no problematic stringing or moisture issue in my use, and good value.
3DHoJorPLA

Basic PLA

Colour / variant
Grey
Pack
1kg
Amazon ASIN
B0D3LSDPT5
My resultEasy to print, good detail and finish, no problematic stringing or moisture issue in my use, and good value.
eSUNPLA+

PLA+ 2-Pack

Colour / variant
Cold White and Cold White
Pack
2kg total
Amazon ASIN
B09Q5YJ5HZ
My resultEasy to print, good detail and finish, no problematic stringing or moisture issue in my use, and good value.
SOVOLSilk PLA

Silk Tri-Colour PLA

Colour / variant
Rose, Blue and Yellow
Pack
1kg
Amazon ASIN
B0C6Z63S9V
My resultEasy to print, good detail and finish, no problematic stringing or moisture issue in my use, and good value.
SOVOLSilk PLA

Silk Tri-Colour Coextrusion PLA

Colour / variant
3-in-1 multicolour variant
Pack
Check current listing
Amazon ASIN
B0C37H3J2F
My resultEasy to print, good detail and finish, no problematic stringing or moisture issue in my use, and good value.

What they had in common in my tests

Consistent positives

  • Easy and uncomplicated printing
  • Good finished print quality
  • Details reproduced cleanly
  • No troublesome stringing in my use
  • No moisture-related problem during testing
  • Good price-to-performance ratio

What still varies

  • PLA, PLA+, PETG and silk PLA need different profiles
  • Colour and bundle selection can change on Amazon
  • Storage conditions affect long-term behaviour
  • Printer and slicer settings influence the final result

PLA, PETG or silk PLA?

Standard PLA is the straightforward everyday choice in this collection. I use it when easy printing and a clean result matter more than high heat resistance. PLA+ variants aim for extra toughness while remaining approachable.

PETG is useful when a part needs more toughness or temperature resistance than basic PLA, although the correct temperature and retraction settings matter. Silk PLA is mainly about appearance: the metallic and multicolour finishes can make decorative prints stand out.

Storage tip: My listed spools did not give me moisture problems, but that does not make filament immune to humidity. Store opened rolls sealed with desiccant and dry a spool when surface quality, popping sounds or stringing suddenly deteriorate.

How to use this list

Choose the material type your model needs, then check colour, pack size and the exact Amazon variation. The same Amazon product page may switch its default colour over time. Start with the temperature range printed on the spool or supplied by the manufacturer, then use a small calibration print for your machine.

The five supplied OVERTURE Easy PLA links currently resolve to the same product family. I have retained every link inside that one database record rather than pretending they are five unrelated products.

Frequently asked questions

Did I personally print every filament on this page?

Yes. This collection is specifically for filaments I have used and found good in practice.

Did I have stringing or moisture problems?

I did not encounter problematic stringing or moisture-related trouble with these filaments during my tests. Different storage, humidity, printers and settings can produce different results.

Why are there no separate reviews for every spool?

The core findings were very similar, so one searchable, growing database is more useful and honest than repeating the same article for each colour or brand.

Will more filaments be added?

Yes. When I test another filament successfully, its product details and link can be added to this page.

Are all links affiliate links?

Product links may be Amazon affiliate links. ThatGermanGuy may earn a commission from qualifying purchases at no extra cost to you.

BG
Tested by Ben at ThatGermanGuy

A growing database based on real prints. Hands-on findings are separated from retailer product names and specifications.

(c) 2026 ThatGermanGuy | Toowong & Brisbane Inner West, Queensland | Tested Gear | Blog | Privacy | Imprint | Disclaimer